Rubber Batch Off Cooler Batch Off Rubber Cooling Machine

Batch Off Cooler Machine For Making Rubber Tube

1. Working conditions
1.1 Equipment use: The film is pressed, soaked, cooled and dried, and then placed (manually) for the next process.

1.2 Equipment use environment: altitude <1000m, the highest temperature is 40℃, the lowest temperature is 5℃; the relative humidity is up to 95%.
1.3 Power supply: AC380/AC220, 50Hz;

1.4 Cooling water: water temperature 25±5℃; water pressure 0.3-0.4MPa; consumption: 6m³/h.

1.5 Compressed air: pressure: 0.5～0.8MPa, consumption: 0.3m³/min

2. Scope of supply

2.1 Access device 1 set
2.2 1 set of pressing device
2.3 1 set of dipping device
2.4 Clamping and lifting device 1 set
2.5 1 set of air cooling device
2.6 1 set of pendulum device
2.7 Pneumatic control device 1 set
2.8 Electrical control system 1 set
2.9 Fixing connecting bolts for equipment parts 1 set

2.10 1 set of expansion bolts for fixing equipment
Description of the scope of supply: The cable of the operation box and the electric control cabinet inside the machine is the responsibility of the supplier; the buyer is responsible for the main cable and connected to the main cabinet. The purchaser of external pipelines such as main water and gas pipes is responsible for connecting them to the machine interface, including the connected valves.

3. Main technical parameters
3.1 The maximum width of the film is 600mm
3.2 Film thickness 6～8mm
3.3 Hanging rod spacing 101.6mm
3.4 The distance between the upper and lower hanging glue rods is about 2500mm
3.5 Film hanging maximum height 2000mm

3.6 The moving speed of the glue rod is 0.23---2.2m/min
3.7 Access motor power 1.5KW
3.8 The maximum linear speed of the film is 35m/min
3.9 Axial fan NO.5 0.75KW

3.10 Number of fans 18 sets

3.11 Overall length of the line about 11 meters.
3.12 Installation method Floor type

COMPANY INTRODUCTION 

QINGDAO SHENGHUALONG RUBBER MACHINERY was established in 1967,have employee more than five hundreds,
manufacturing for rubber machine and laminating machine.
As a rubber machinery manufacturer ,Hangsen has land for more than 50000 square meters, with a total assets of more than USD 100million, more than 500 employees, and 60 mechanical engineers,

The company is one of the largest private enterprises engaging in professional produce rubber machine .
We 8 meters gantry type milling machine,
TK6913B CNC boring and milling machine
TPX6213 floor boring
TPX6113 milling and boring machine
Vertical machining center
CY-K630 CNC lathe
2.5 Meters vertical lathe and other large advanced processing equipment
We mainly produce following machinery.
Radial tire equipment
XK-660 Rubber open mixing mill
42 to 65.5 inch double mold vulcanizing machine
75-105 inch single mold vulcanizing machine
Internal mixer series, Rubber mixing mill series, Extrusion and filter series
Tyre tube, flap, inner tube plate vulcanizing machine
Waste tire recycling line
Rubber reclaim sheet line and so on,
We can also design and manufacture for various non-standard rubber machinery and equipment according to the customers requirement.
Our company always follows the market concept of “Market demand first , Customer first.
Till now,We have exported to more than 40 countries,enjoy a good reputation in the world market.