18KW-34KW Batch Off Rubber Cooling Machine Electric Driven

Batch Off Rubber Cooling Machine Batch-Off Cooler Line

Batch Off Cooler Machine For Making Rubber Tube

1. Working conditions
1.1 Equipment use: The film is pressed, soaked, cooled and dried, and then placed (manually) for the next process.

1.2 Equipment use environment: altitude <1000m, the highest temperature is 40℃, the lowest temperature is 5℃; the relative humidity is up to 95%.
1.3 Power supply: AC380/AC220, 50Hz;

1.4 Cooling water: water temperature 25±5℃; water pressure 0.3-0.4MPa; consumption: 6m³/h.

1.5 Compressed air: pressure: 0.5～0.8MPa, consumption: 0.3m³/min

2. Overview of the main structure

1 )Access device:
It is used to pick up the film pressed out from the tablet press. The lifting and lowering of the swing pick-up frame is controlled by the air cylinder, which is convenient for operation; the speed of the pick-up can be adjusted manually, which can be matched with the speed of the tablet press and the rear lifting device.
2 )Pressing device:
Equipped with a triplet, a valve and a pressing cylinder, the cylinder is controlled by a solenoid valve to drive the action of the regulating pressure roller, so that the discontinuous films are pressed together, so that the films can be continuously produced.

3 )Soaking device: Function: Soak the film conveyed by the receiving device, and carry the release agent.

Equipped with an isolation agent tank, equipped with a cooling system, and connected to the cooling water source, the isolation liquid can be continuously cooled to control the temperature of the isolation liquid.
4 )Clamping and lifting device:

The device climbs and transports the film coated with isolation liquid to the air-cooled section, and the climbing device is lifted at a certain angle with the horizontal ground;

There is a water collecting tank under the climbing device, which can drain the excess release agent from the film back into the isolation tank.

The support belt has a jog reversal function to prevent the glue from being blocked at the glue inlet, and the film can be reversed and returned to the isolation agent tank, which is convenient for handling unexpected situations and reducing downtime and maintenance time.

5 )Air cooling device:

Composition: It consists of rack, cooling fan, hanging rod and hanging rod conveying device, wind deflector, etc.

The hanging rod adopts the welded structure of steel pipe, and the pin is installed on the hanging rod. The film is pressed by the pressure roller device in the air-cooling section, and the pin is fixed on the hanging rod to prevent the film from sliding off the hanging rod under the strong wind blowing.

COMPANY INTRODUCTION 

QINGDAO SHENGHUALONG RUBBER MACHINERY was established in 1967,have employee more than five hundreds,
manufacturing for rubber machine and laminating machine.
As a rubber machinery manufacturer ,Hangsen has land for more than 50000 square meters, with a total assets of more than USD 100million, more than 500 employees, and 60 mechanical engineers,

The company is one of the largest private enterprises engaging in professional produce rubber machine .
We 8 meters gantry type milling machine,
TK6913B CNC boring and milling machine
TPX6213 floor boring
TPX6113 milling and boring machine
Vertical machining center
CY-K630 CNC lathe
2.5 Meters vertical lathe and other large advanced processing equipment
We mainly produce following machinery.
Radial tire equipment
XK-660 Rubber open mixing mill
42 to 65.5 inch double mold vulcanizing machine
75-105 inch single mold vulcanizing machine
Internal mixer series, Rubber mixing mill series, Extrusion and filter series
Tyre tube, flap, inner tube plate vulcanizing machine
Waste tire recycling line
Rubber reclaim sheet line and so on,
We can also design and manufacture for various non-standard rubber machinery and equipment according to the customers requirement.
Our company always follows the market concept of “Market demand first , Customer first.
Till now,We have exported to more than 40 countries,enjoy a good reputation in the world market.